Beam Mould

Home \| About \| Products \| New Arrivals \| Events \| Contacts
	Quality Equipment, Quick Supprot & At The Right Time
Material Testing Equipments

Concrete Testing Machines

Section: CONCRETE

Consistency & Workability
Penetration
Mixing Equipments
Moulding Equipments
Tamping Rod
Tamping Bar
Straight Edge
Cube Mould
Cylindrical Mould
Beam Mould
Gang Mould (Three Gang)
Capping
Curing
Test on Hardened Concrete
Density of Concrete
Compression & Flexural Strength
Permeability
Air Entrainment


		Beam Mould : ZI 2021 BS 1881-108 For casting, concrete specimen for flexure tests Specification : Made of Cast Iron / Mild Steel. The mould are made of 4 plates assembled together. Each mould is supplied complete with base plate. Faces are machined flat to ± 0.2mm. And finished in size to 0.2mm. ZI 2021 : 10 CM X 10CM X 50CM ZI 2022 : 15CM X 15CM X 70CM ZI 2023 : 15CM X 15CM X 75CM ZI 2024 : 10CM X 15CM X 60CM ZI 2025 : 4CM X 4CM X 16CM Click here to download PDF.

All Rights Reserved with ZEAL INTERNATIONAL : 1, Netaji Subhash Marg, Daryaganj, New Delhi - 110002 INDIA
Tel.: +91-11-23276114, 23244474, 23250281, 23278846 Fax : +91-11-43580558 E-mail : info@zealinternational.com

Home | About | Products | New Arrivals | Events | Contacts | E-mail | Sitemap | Disclaimer