Curing Tank : ZI 2032-A
a) 24 Hour cycle from time of mixing.
b) Controlled 35
oC or 100
oC ±2
oC Curing Temperature for concrete.
c) Controlled 27
oC ± 2
oC Curing Temperature for grey cement.
The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two
removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35
oC or 100
oC ± 2
oC / 27
oC +2
oC , expect for the 15 minutes after immersion of the freshly made specimens.
ZI 2032-1
Curing Tank for 6/12 moulds of 150mm / 70.6mm size
ZI 2032-2
Curing Tank for 12/24 moulds of 150mm / 70.6mm size
ZI 2032-3
Curing Tank for 24/48 moulds of 150mm / 70.6mm size
ZI 2032-4
Curing Tank for 36/72 moulds of 150mm / 70.6mm size
Note : Accelerated curing tank with cooling arrangement is also available of request.
Click here to download PDF. 
