Compression Testing Machine: ZI 2051
Range of Semi Automatic concrete compression machines
give users the ability to test and analyse concrete samples in
accordance with all major international standards. The
power pack incorporates a durable variable output pump,
allowing fine control for accurate load pacing, or maximum
pump output for daylight closure. The rapid approach pump
provides a high rate of daylight closure and is available as an
optional extra for the motorised power pack- only if fitted at
the time of ordering. An onboard LED screen allows the
sample load / Stress to be monitored. The control panel
allows for data input and manual control if required. Testers
are manufactured in the range of 300 kN - 5000 kN
capacities. The standard models are of 1150 kN, 2000 kN
and 3000 kN capacity. Suitable for testing 50mm, 100mm,
150mm and 200mm cube samples as well as cylinder
samples with 75 160mm diameter and 150-320mm height.
Pressure safety valve, piston limit switch, removable front and rear gates are standard in all models. Upper compression platens have ball seating assembly for movement in all models. All compression platens have a surface hardness of 55 HRC. Required distance pieces of 100mm, 50mm and 20mm for vertical test distance are supllied as standard in all models. Pressure transducer with a sensitivity of %0.3 is used for load measurements. All models operate with 220-240 V AC, 50 60 Hz, 1 phase mains power.
Click here to download PDF.
