Static Cone Penetrometer Capacity 100KN (10,000KGF) (Engine Driven) : ZI 3088
IS 4968 (PART III)
For reaching greater depths and to facilitate easy and constant rate of penetration 1 to 2.5cm/sec of the cone this engine-driven Static Cone Penetrometer of 100 KN (10,000 Kgf) capacity is preferable. The equipment consists of a hydraulic pump driven by a Diesel Engine. The whole system is mounted on a tow able trolley fitted with pneumatic wheels. The pumping unit and ram are connected by means of flexible pipes through a direction control valve. The hydraulic ram moves on a two pillar stand mounted on a trolley.
COMPLETE WITH THE FOLLOWING :
ZI 3088-1
Penetration Cone, steel 60 cone angle, 10cm
2 base area, with friction jacket One
ZI 3088-2
Mantle Tube, 36mm uniform OD with sounding Rod working length 1 m Thirty
ZI 3088-3
Load Measuring Head, with Automatic cut-off valve, and oil can without pressure gauges. One
ZI 3088-4
Pressure Gauge, 0-600 x 5 kg/cm One
ZI 3088-5
Pressure Gauge, 0 100 x 1kg/cm One
ZI 3088-6
Trusses Two
ZI 3088-7
Screw Anchor 45 cm Six
ZI 3088-8
Screw Anchor 30 cm Six
ZI 3088-9
Screw Anchor 20 cm Six
ZI 3088-10
Screw Anchor Rod with cone Six
ZI 3088-11
Driving handle for Screw Anchor One
ZI 3088-12
Extension Pipe for Handle Four
ZI 3088-13
Clamping Screw with Nuts Six
ZI 3088-14
Extractor Tube with Connector One
ZI 3088-15
Tool Box One
ZI 3088-16
Tarpaulin Cover One
Click here to download PDF.
