ZI 2057
Standards:
Specification:
Capacity: 100, 250 & 500 kN (Low Capacity)
Two Pillar Compression Testing Machine is one of the oldest design in the Civil Material Testing Division. Two Pillar are vertically fixed to a sturdy base and at other end is fixed to a cross head. The height of the cross head is adjustable. A 200 mm diameter heavy duty load gauge is supplied with accuracy of +/- 1%. To the lower end of the lead screw is fixed the Upper Platen with a spherical seat for self-alignment. At the center of the base plate is fixed a hydraulic jack with piston lift for 50 mm.
A distance spacer block is also provided to make adjustment of different specimen to be tested. The lower platen is resting on the spacer with a center pin. This machine is state-of-the-art product for testing low strength concrete/cement specimens.
Specifications:
| Unit | ZI-2057-1 | ZI-2057-2 | ZI-2057-3 | |
| Capacity | kN | 100 | 250 | 500 |
| Ram Diameter | mm | 82 | 82 | 116 |
| Ram Travel | mm | 50 | 50 | 50 |
| Pressure Gauge | mm | 200 | 200 | 200 |
| Least Count | kN | 0.5 | 1.0 | 2.0 |
| Maximum Pressure | Kg/Sq. cm | 200 | 480 | 480 |
| Platen Diameter | mm | 200 | 200 | 200 |
| Horizontal Clearance | mm | 210 | 210 | 210 |
| Vertical Day Light | mm | 310 (adj.) | 310 (adj.) | 310 (adj.) |
| Load Frame Height with Lead-screw | mm | 850 | 850 | 850 |
| Weight of Machine (approx.) | Kg. | 120 | 125 | 130 |
| Specimen that can be Tested | mm | 50 & 70.6 | 50 & 70.6 | 50, 70.6 & 100 |
